$เครื่องวัดน้ำยาหล่อเย็น ดิจิตอล ATAGO Refractometer PAL-102S$

$เครื่องวัดน้ำยาหล่อเย็น ดิจิตอล ATAGO Refractometer PAL-102S PAL-102S ATAGO Cutting Oil Refractometer$

ATAGO : PAL-102S (Cutting Oil)

This measuring device is designed for measuring cutting oil. It can monitor the concentration of the oil to ensure it is not too low or too high, preventing future issues. The design is made from materials resistant to high levels of amines in cutting oil and also includes an NFC function for easy data transfer by holding the device close to a phone or NFC reader. Its design is compact and portable.

Characteristics of PAL-102S usage

For mixing new solution Using the PAL-102S ensures that it is diluted to the proper concentration, which may vary depending on the type of oil and production conditions. The proper concentration for cutting oil is approximately 5 to 10%
During Machine Cutting Use the PAL-102S to measure the concentration to check the working conditions, such as monitoring the concentration of the wastewater treatment tank and the oil, which can help prolong the lifespan of the oil.

Replenishing Oil Due to the evaporation of the oil concentration, it is constantly changing. If you want to restore the concentration to its initial level, you need to use the PAL-102S for measuring the oil concentration. If the oil concentration is too high, it can cause dry skin and irritation to workers. Conversely, if the concentration is too low, it can easily cause rust on various machines. The PAL102S can also measure the concentration while mixing.

Specification : PAL-102S (Cutting Oil)

Range : Cutting Oil 0.0 to 70.0%
Resolution :
Cutting Oil 0.1%
Temperature : 0.1°C
Accuracy : ±0.2%
Temperature compensation : 10 to 100°C
Sample Volume : 2 to 3 drops
Measurement Time : About 3 seconds
Power Supply : 2 × AAA Batteries
International Protection Class : IP65 Water resistant
Dimensions & Weight : 5.5 × 3.1 × 10.9cm 100g (main unit only)

How to use

How to use : Apply the diluted solution onto the PAL-102S, then press the “Start” button to read the value of the diluted solution.