The better... Quality Standard
With our understanding of our services and our products
It will guide you to better standard and maintaining the standard in the front line
Another one of our small start up business: atta-found.com
Most of the people may already know of how to use vernier calipers due to it user friendly. So what we are talking today is about the common mistake that many people may make during measuring of Inner Diameter. ID Inner Diameter can be measured with Air Micrometer also
First of all, when the user measure something (In this case is ring-shape type).
ID knows as Inner Diameter. OD knows as Outer diameter and Thickness of the object.
Trick question: If the object has OD 10mm and thickness 2mm, how much is length of ID?….
8mm? wrong! Don’t forget to minus both side of thickness so ID is 6mm
Start with OD (Outer Diameter); OD starts from the outer part side to side and includes thickness.
OD can be done with any natural means or special technique. It just depends on the selection of Jaw-type to serve the user’s purpose.
** OD measuring can be done with generally tool like Calipers or Air micrometer and with Caliper, user can be using it without any problem with it. There are quite several Jaw-types for OD measuring as well. (Pointy jaw, Offset jaw, Depth type, Blade jaw type, etc.)
Now we can Cleary see it from the diagram above if we use Jaws for measurement Inner Diameter Rediused Jaws. Common objects that use this jaw are object with circle based (Cylinder pipe, Ring, Bearing)
Using Vernier Calipers that suit your purpose is a preferable choice that may result in higher precision.
With our understanding of our services and our products
It will guide you to better standard and maintaining the standard in the front line
Another one of our small start up business: atta-found.com