Menu
Flow inspector: MX-2000S. Eddy current tester which inspect the completation of the workpiece with eddy current. MX-2000S has been designed to be able to operate in the production line (in-line system). Parameter became much easier to setting up with Visual Wave monitor. Inspection can be done without destroying the workpiece or making contact with workpiece
Visual wave : the inspection result is display on the monitor in X-Y and V-T
By the operation of Probe and Eddy Current, it can detect the defect :
| Model | MX-2000S |
|---|---|
| Power supply | AC 100-240V 50Hz/60Hz 60W |
| Input / output | Input 8 points ( Photo-coupler ) / Output 9 points ( MOS FET ) |
| Environment in use | Temp 0℃ – 40℃ Humidity 10 – 80％RH ( No condensation ) |
| Case dimensions | 370 ｘ 205.1 ｘ 374.1 ( W ｘ H ｘ D ) |
Inspecting the crack on the workpiece of screw after the heat treatment is being done. By the installing of probe movement mechanism, the probe can move freely and also able to inspecting the rotating screw.
By the setting and automatic working, they allow the MX-2000S to inspect the workpiece while it rotating with high speed rotation. Reduce the time consumption and working easier. The function also allow to automatically adjusting to each workpiece
By the setting of Eddy current tester to inspecting on the part area which likely to find defect. MX-2000S also allow the operation to be done on workpiece that is not Magnetized and user doesn’t need to demagnetize and increase the speed of operation time
Contact us
With our understanding of our services and our products
It will guide you to better standard and maintaining the standard in the front line
Another one of our small start up business: atta-found.com
