Menu
SURFCOM NEX : The Surface texture and Contour measurement equipment. One of the solutions for contour and surface measurement in one machine. The SURFCOM NEX will measure both the roughness and contour in the width profile all together in one go of measuring the workpiece.
Measurement noise is being reduced by the ultra-low vibration mechanism (Magnetic Linear Drive)
With the mechanism of Ultra-Low Vibration, the mechanism will reduce the Noise from the Vibration and resulting of much more accurate of measurement data
SURFCOM can also operate in the temperature of 20+-5 Celsius
Measuring range Z (Standard stylus)
Measuring range Z for roughness : Max. 1000µm (Standard Stylus)
Resolution Roughness : min. 0.1nm
Accuracy Z : +/- 2% on 20µm periode
Straightness X : 0.05+L/1000µm
Measuring range Z (Standard stylus)
Measuring range Z for contour : 60mm
Resolution Contour : 0.04µm
Accuracy Z : +/- (1.5+[2H]/100)µm
Straightness X : 1µm/100mm
Measuring range Z for contour : 60mm
Resolution Contour : 0.02µm
Accuracy Z : +/- (0.8+[2H]/100)µm
Straightness X : 1µm/100mm
Measuring range Z for roughness : Max. 1000mm
Measuring range Z for contour : 60mm
Resolution Roughness : min. 0.1nm
Resolution Contour : 0.04µm
Accuracy Z : +/- (1.5+[2H]/100)µm
Straightness X : 0.05+L/1000µm
Measuring range Z for roughness : Max. 1000mm
Measuring range Z for contour : 60mm
Resolution Roughness : min. 0.1nm
Resolution Contour : 0.02µm
Accuracy Z : +/- (0.8+[2H]/100)µm
Straightness X : 0.05+L/1000µm
Measuring range Z for roughness and Contour: 5mm
Resolution roughness and contour : min 0.1nm
Resolution only Contour : 0.1µm
Accuracy Z : +/- (1.0+[2H]/100)µm
Straightness X : 0.05+L/1000µm
Contact us
With our understanding of our services and our products
It will guide you to better standard and maintaining the standard in the front line
Another one of our small start up business: atta-found.com
